Face Fit Testing is the process and testing of ensuring the correct fit of RPE (Respiratory Protective Equipment). Certain job roles and industries require employees to wear particular RPE, in order to protect them from various harmful environments – such as dust and fumes.
If their RPE is not correctly fitted, then the employee could potentially be exposed to hazardous substances, causing ill-health. RPE Face-Fit-Testing is carried out either on-site or at one of our clinics by a fully trained, qualified and experienced professional.
The test utilises the same RPE that will be worn whilst working on the daily task, which ensures the most accurate testing and outcome.
Employer Face-Fit Test Obligations:
Our team of experienced and professional respiratory specialists will offer technical advice where needed and show your workforce how to wear their RPE correctly. Our experienced team has delivered thousands of training sessions and use this knowledge to deliver a seamless an educational program to employees across a range of sectors.
Our team are Fit2Fit accredited by the BSIF which is the only UK competency scheme supported by the HSE
Employers must provide the correct training in the use and care of respirators and Respiratory protective equipment (RPE) and Face Fit Tests for their employees whose work activities can result in harmful substances contaminating the air in the form of dust, gas or fumes.
Quantitative fit testing (QNFT) Quantitative fit testing (QNFT) provides a numerical measure of how well a facepiece seals against a wearer’s face; this is called a fit factor. These tests give an objective measure of face fit. QNFT methods are suitable for disposable and reusable half masks and full face masks. Examples of QNFT methods are: ambient particle counting and controlled negative pressure (CNP)
Qualitative fit testing (QLFT) is a pass/fail test based on the wearer’s subjective assessment of any leakage through the face seal region by detecting the introduction of bitter- or sweet-tasting aerosol as a test agent. QLFT methods are suitable for disposable and reusable half masks; they are not suitable for full-face masks. Although this type of test is based on subjective detection and response by the wearer of the RPE, it is important that it is administered by a fit tester competent in using this method.
Skin surveillance. Workplace occupational health skin surveillance for employees across a range of industries.
Occupational health, services and support. Latus Health provides a range of occupational health services for UK businesses.
First aid and mental health first aid training and qualifications – Train your teams to ensure compliance and provide care & support to employees when they require.
First Aid training and qualifications to ensure compliance and provide care & support to employees when they require.
Face Fit Testing is the process and testing of ensuring the correct fit of RPE (Respiratory Protective Equipment). Certain job roles and industries require employees to wear particular RPE, in order to protect them from various harmful environments – such as dust and fumes.
If their RPE is not correctly fitted, then the employee could potentially be exposed to hazardous substances, causing ill-health. RPE Face-Fit-Testing is carried out either on-site or at one of our clinics by a fully trained, qualified and experienced professional.
The test utilises the same RPE that will be worn whilst working on the daily task, which ensures the most accurate testing and outcome.
Employer Face-Fit Test Obligations:
Our team of experienced and professional respiratory specialists will offer technical advice where needed and show your workforce how to wear their RPE correctly. Our experienced team has delivered thousands of training sessions and use this knowledge to deliver a seamless an educational program to employees across a range of sectors.
[image] => Array ( [ID] => 9193 [id] => 9193 [title] => Metal Workshop,USA,Woman wearing safety glasses and dust mask standing in metal workshop [filename] => woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951.jpg [filesize] => 531140 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951.jpg [link] => https://www.latushealth.co.uk/service/facefit/metal-workshopusawoman-wearing-safety-glasses-and-dust-mask-standing-in-metal-workshop/ [alt] => [author] => 4 [description] => [caption] => Woman wearing safety glasses and dust mask standing in metal workshop [name] => metal-workshopusawoman-wearing-safety-glasses-and-dust-mask-standing-in-metal-workshop [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-08 11:16:07 [modified] => 2022-09-08 11:16:07 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 1447 [height] => 755 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-300x157.jpg [medium-width] => 300 [medium-height] => 157 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-768x401.jpg [medium_large-width] => 768 [medium_large-height] => 401 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-1024x534.jpg [large-width] => 1024 [large-height] => 534 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662635802499-1300x1536.jpg [1536x1536-width] => 1300 [1536x1536-height] => 1536 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-2048x1366.jpg [2048x2048-width] => 2048 [2048x2048-height] => 1366 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-1600x1067.jpg [large_full-width] => 1600 [large_full-height] => 1067 ) ) [button] => Array ( [show_button] => [button_text] => [button_type] => external [button_url] => [button_page] => [media_file] => [button_link] => ) ) [1] => Array ( [acf_fc_layout] => split_content [section_properties] => Array ( [background_colour] => white [reverse] => ) [tagline] => Fit2Fit Accredited Face Fit Testing [content] =>Our team are Fit2Fit accredited by the BSIF which is the only UK competency scheme supported by the HSE
[image] => Array ( [ID] => 9202 [id] => 9202 [title] => Fit2Fit-1 [filename] => Fit2Fit-1.jpg [filesize] => 12991 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [link] => https://www.latushealth.co.uk/service/facefit/fit2fit-1-2/ [alt] => [author] => 4 [description] => [caption] => [name] => fit2fit-1-2 [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-13 07:44:08 [modified] => 2022-09-13 07:44:08 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 400 [height] => 208 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1-300x156.jpg [medium-width] => 300 [medium-height] => 156 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [medium_large-width] => 400 [medium_large-height] => 208 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [large-width] => 400 [large-height] => 208 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [1536x1536-width] => 400 [1536x1536-height] => 208 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [2048x2048-width] => 400 [2048x2048-height] => 208 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [large_full-width] => 400 [large_full-height] => 208 ) ) [button] => Array ( [show_button] => [button_text] => [button_type] => external [button_url] => [button_page] => [media_file] => [button_link] => ) ) [2] => Array ( [acf_fc_layout] => column [heading] =>Employers must provide the correct training in the use and care of respirators and Respiratory protective equipment (RPE) and Face Fit Tests for their employees whose work activities can result in harmful substances contaminating the air in the form of dust, gas or fumes.
[image] => Array ( [ID] => 9190 [id] => 9190 [title] => A man in a facemask with breathing filters, a skilled factory worker welding arts of a bicycle in a factory.,Cycle Factory,England [filename] => a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513.jpg [filesize] => 521142 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513.jpg [link] => https://www.latushealth.co.uk/service/facefit/a-man-in-a-facemask-with-breathing-filters-a-skilled-factory-worker-welding-arts-of-a-bicycle-in-a-factory-cycle-factoryengland/ [alt] => [author] => 4 [description] => [caption] => A man in a facemask with breathing filters, a skilled factory worker welding arts of a bicycle in a factory. [name] => a-man-in-a-facemask-with-breathing-filters-a-skilled-factory-worker-welding-arts-of-a-bicycle-in-a-factory-cycle-factoryengland [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-08 10:20:17 [modified] => 2022-09-08 10:20:17 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 2560 [height] => 1036 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-300x121.jpg [medium-width] => 300 [medium-height] => 121 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-768x311.jpg [medium_large-width] => 768 [medium_large-height] => 311 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1024x414.jpg [large-width] => 1024 [large-height] => 414 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1536x622.jpg [1536x1536-width] => 1536 [1536x1536-height] => 622 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-2048x829.jpg [2048x2048-width] => 2048 [2048x2048-height] => 829 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1600x648.jpg [large_full-width] => 1600 [large_full-height] => 648 ) ) [column_1] =>Quantitative fit testing (QNFT) Quantitative fit testing (QNFT) provides a numerical measure of how well a facepiece seals against a wearer’s face; this is called a fit factor. These tests give an objective measure of face fit. QNFT methods are suitable for disposable and reusable half masks and full face masks. Examples of QNFT methods are: ambient particle counting and controlled negative pressure (CNP)
[column_2] =>Qualitative fit testing (QLFT) is a pass/fail test based on the wearer’s subjective assessment of any leakage through the face seal region by detecting the introduction of bitter- or sweet-tasting aerosol as a test agent. QLFT methods are suitable for disposable and reusable half masks; they are not suitable for full-face masks. Although this type of test is based on subjective detection and response by the wearer of the RPE, it is important that it is administered by a fit tester competent in using this method.
) ) [page_builder_clone] => Array ( [page_builder] => Array ( [0] => Array ( [acf_fc_layout] => split_content [section_properties] => Array ( [background_colour] => white [reverse] => ) [tagline] => Industry Leading Face Fit Testing [content] =>Our team of experienced and professional respiratory specialists will offer technical advice where needed and show your workforce how to wear their RPE correctly. Our experienced team has delivered thousands of training sessions and use this knowledge to deliver a seamless an educational program to employees across a range of sectors.
[image] => Array ( [ID] => 9193 [id] => 9193 [title] => Metal Workshop,USA,Woman wearing safety glasses and dust mask standing in metal workshop [filename] => woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951.jpg [filesize] => 531140 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951.jpg [link] => https://www.latushealth.co.uk/service/facefit/metal-workshopusawoman-wearing-safety-glasses-and-dust-mask-standing-in-metal-workshop/ [alt] => [author] => 4 [description] => [caption] => Woman wearing safety glasses and dust mask standing in metal workshop [name] => metal-workshopusawoman-wearing-safety-glasses-and-dust-mask-standing-in-metal-workshop [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-08 11:16:07 [modified] => 2022-09-08 11:16:07 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 1447 [height] => 755 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-300x157.jpg [medium-width] => 300 [medium-height] => 157 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-768x401.jpg [medium_large-width] => 768 [medium_large-height] => 401 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662636039951-1024x534.jpg [large-width] => 1024 [large-height] => 534 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-scaled-e1662635802499-1300x1536.jpg [1536x1536-width] => 1300 [1536x1536-height] => 1536 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-2048x1366.jpg [2048x2048-width] => 2048 [2048x2048-height] => 1366 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/woman-wearing-safety-glasses-and-dust-mask-standin-2022-03-04-02-22-33-utc-1600x1067.jpg [large_full-width] => 1600 [large_full-height] => 1067 ) ) [button] => Array ( [show_button] => [button_text] => [button_type] => external [button_url] => [button_page] => [media_file] => [button_link] => ) ) [1] => Array ( [acf_fc_layout] => split_content [section_properties] => Array ( [background_colour] => white [reverse] => ) [tagline] => Fit2Fit Accredited Face Fit Testing [content] =>Our team are Fit2Fit accredited by the BSIF which is the only UK competency scheme supported by the HSE
[image] => Array ( [ID] => 9202 [id] => 9202 [title] => Fit2Fit-1 [filename] => Fit2Fit-1.jpg [filesize] => 12991 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [link] => https://www.latushealth.co.uk/service/facefit/fit2fit-1-2/ [alt] => [author] => 4 [description] => [caption] => [name] => fit2fit-1-2 [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-13 07:44:08 [modified] => 2022-09-13 07:44:08 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 400 [height] => 208 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1-300x156.jpg [medium-width] => 300 [medium-height] => 156 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [medium_large-width] => 400 [medium_large-height] => 208 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [large-width] => 400 [large-height] => 208 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [1536x1536-width] => 400 [1536x1536-height] => 208 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [2048x2048-width] => 400 [2048x2048-height] => 208 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/Fit2Fit-1.jpg [large_full-width] => 400 [large_full-height] => 208 ) ) [button] => Array ( [show_button] => [button_text] => [button_type] => external [button_url] => [button_page] => [media_file] => [button_link] => ) ) [2] => Array ( [acf_fc_layout] => column [heading] =>Employers must provide the correct training in the use and care of respirators and Respiratory protective equipment (RPE) and Face Fit Tests for their employees whose work activities can result in harmful substances contaminating the air in the form of dust, gas or fumes.
[image] => Array ( [ID] => 9190 [id] => 9190 [title] => A man in a facemask with breathing filters, a skilled factory worker welding arts of a bicycle in a factory.,Cycle Factory,England [filename] => a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513.jpg [filesize] => 521142 [url] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513.jpg [link] => https://www.latushealth.co.uk/service/facefit/a-man-in-a-facemask-with-breathing-filters-a-skilled-factory-worker-welding-arts-of-a-bicycle-in-a-factory-cycle-factoryengland/ [alt] => [author] => 4 [description] => [caption] => A man in a facemask with breathing filters, a skilled factory worker welding arts of a bicycle in a factory. [name] => a-man-in-a-facemask-with-breathing-filters-a-skilled-factory-worker-welding-arts-of-a-bicycle-in-a-factory-cycle-factoryengland [status] => inherit [uploaded_to] => 9189 [date] => 2022-09-08 10:20:17 [modified] => 2022-09-08 10:20:17 [menu_order] => 0 [mime_type] => image/jpeg [type] => image [subtype] => jpeg [icon] => https://www.latushealth.co.uk/wp-includes/images/media/default.png [width] => 2560 [height] => 1036 [sizes] => Array ( [thumbnail] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-150x150.jpg [thumbnail-width] => 150 [thumbnail-height] => 150 [medium] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-300x121.jpg [medium-width] => 300 [medium-height] => 121 [medium_large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-768x311.jpg [medium_large-width] => 768 [medium_large-height] => 311 [large] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1024x414.jpg [large-width] => 1024 [large-height] => 414 [1536x1536] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1536x622.jpg [1536x1536-width] => 1536 [1536x1536-height] => 622 [2048x2048] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-2048x829.jpg [2048x2048-width] => 2048 [2048x2048-height] => 829 [large_full] => https://www.latushealth.co.uk/wp-content/uploads/2022/09/a-man-in-a-facemask-with-breathing-filters-a-skil-2022-03-04-02-11-30-utc-scaled-e1663055650513-1600x648.jpg [large_full-width] => 1600 [large_full-height] => 648 ) ) [column_1] =>Quantitative fit testing (QNFT) Quantitative fit testing (QNFT) provides a numerical measure of how well a facepiece seals against a wearer’s face; this is called a fit factor. These tests give an objective measure of face fit. QNFT methods are suitable for disposable and reusable half masks and full face masks. Examples of QNFT methods are: ambient particle counting and controlled negative pressure (CNP)
[column_2] =>Qualitative fit testing (QLFT) is a pass/fail test based on the wearer’s subjective assessment of any leakage through the face seal region by detecting the introduction of bitter- or sweet-tasting aerosol as a test agent. QLFT methods are suitable for disposable and reusable half masks; they are not suitable for full-face masks. Although this type of test is based on subjective detection and response by the wearer of the RPE, it is important that it is administered by a fit tester competent in using this method.
) ) ) )